Eberlestock A1SP Small Pouch - These deluxe lightweight padded cases are specially designed to integrate with our products. They are hooked on to our packs with the Padlock system, or can be slung onto a sternum strap. These are not ordinary accessory pouches. As you would expect from Eberlestock, these are high-quality, finely built cases designed to protect valuable equipment. The A1SP is sized to fit a range finder or small camera. it is lined with our high-visibility light gray interior nylon. Dimensions: 5"h x 6"w x 2"d Weight:4 oz

Eberlestock A2SP Large Padded Accessory Pouch - These deluxe lightweight padded cases are specially designed to integrate with our products. They are hooked on to our packs with the Padlock system, or can be slung onto a sternum strap. These are not ordinary accessory pouches. As you would expect from Eberlestock, these are high-quality, finely built cases designed to protect valuable equipment. The A2SP (shown in photos with Nikon LX Premier 10 x 42 'nocs, not included of course) is a binocular-sized case, with a second pocket for small sundries. The main compartment is lined with our extra-soft, fleece-like material. Dimensions: 6"h x 8"w x 2.5"d Weight: 6 oz

Eberlestock A3SB Saddle Bag - Use these saddle bags to add about 3 liters capacity to our packs. Use them for additional gear storage, or when paired with our hydration bladders, they're a great way to externally mount hydration on a pack so that the bladder is easily accessible. The Saddle Bag is perfectly sized for our WXP3L hydration unit. There are two ways to attach the A3SB to a pack: they mount best on 6-row tall Padlock webbing panels using the Saddle Bag's integrated clip system, but can be mounted in a variety of other places using a tether attachment. The A3SB is particularly recommended for our G2, GS05, H2, and F3F packs, but will work with most others. Dimensions: 17"h x 5"w x 3"d Weight: 10 oz

Eberlestock A6SB Batwing Pouch - Pouch Volume: 615 c.i. Weight: 11 oz Dimensions: 21"h x 6"w x 5"d The tall, narrow pockets on our J-Type packs are proven as a great way to stay organized. Because they don't have a lot of lateral space, things tend not to jumble around as you go through your pace. We like to think of each tube as a three-tiered space: bulk on the bottom, bulk on the top, and your apples, oranges, and widgets in the middle. When it's time to look for you apple, it'll be right where you put it, easy as that. Now comes the fun part: you can add a tube or two to just about any of our packs with our new A6SB Batwing Pouch. Think of the opportunities. Use two of them with the F1-Mainframe, and shazzam you've got a great minimalist version of our patented Cam Expansion™ packs, ready for a day's hunting interrupted by a harvest of a giant you-name-it. Or, add them to a J-type pack to add a third or fourth tube as a handy and simple way to increase capacity. Each Batwing features a wrap-around zipper for access, internal hydration sleeve (add one of our Source™ bladders!), attachment zippers compatible with our modular system, external tuck-pocket, and webbing loops running down the backside that give you the option of hanging the Batwing on your Eberlestock pack's grapple straps.

Eberlestock SR Reveille Sleeping Bag - Reveille, as in “I can’t get ‘em up, I can’t get ‘em up, I can’t get ‘em up in the morning!” This top-of-the-line European-made synthetic bag will go head-to-head with any synthetic bag on the planet. This great 3-season bag can be combined with our Ultralight bag (with the latter used as a liner), which turns the pair into an excellent cold weather bag. If you buy both, you will be ready for any environment. The Reveille features Carinthia G-Loft insulation, the best synthetic insulation on the planet. This type of bag is recommended for environments where you may encounter wet conditions, as G-Loft maintains very good insulation performance and keeps its loft when damp. Comfort rated to 5 F. Practical "push" rated to -36 F. Sizes: Regular for body height up to 72.5". Long for body height up to 78.7". Actual Weight = 4.0 lbs. Shipping Dimensional Weight = 12 lbs.

Eberlestock WXP2L Hydration Bladder 2L - Weight: 9 oz We think this is the ultimate hydration bladder system. Made by Source®, our premium bladders are BPA-free, use patented anti-bacterial technology, and Glass-Like™ liner, so that you get a product that gives great tasting drinks and long life. We've added our own specifications to make this into the hydration system that best fits our products and the things that our customers will be doing with them. Special standard features include a weave covered insulated drink tube, a lockable bike-bottle style push-pull drink valve with a dirt shield. Dual-fill options allow open-end access or use of a screw-off Nalgene size cap. Please note: This bladder is recommended for all Eberlestock packs, with the following exceptions and caveats: It does not fit older X1 series packs with the side-pocket hydration (but does fit newer X1s with interior back wall hydration sleeves and top-center hydration tube portal).

Weight: 10 oz Our backpacks are ready to accommodate our top-of-the-line hydration systems. You'll find that they have dedicated bladder pockets, louvered tube portals, and tube-friendly harnesses. We think this is the ultimate hydration bladder system. Made by Source®, our premium bladders are BPA-free, use patented anti-bacterial technology, and Glass-Like™ liner, so that you get a product that gives great tasting drinks and long life. We've added our own specifications to make this into the hydration system that best fits our products and the things that our customers will be doing with them. Special standard features include a weave covered insulated drink tube, a lockable bike-bottle style push-pull drink valve with a dirt shield. Dual-fill options allow open-end access or use of a screw-off Nalgene size cap. Please note: This bladder is recommended for all Eberlestock packs, with the following exceptions and caveats: It does not fit the X1 series packs. It fits in the main outboard pockets of the Phantom and Halftrack, but not in the narrow sleeve with the hydration hooks.

These Reversible Waterproof Rain Covers are tailor made to fit our smaller backpacks, in the size class of the Gunslinger and the X1. We know how important it is to keep your stuff dry when you're out in the weather. So we've made covers that will give you every option. The G2RC is big enough to go over our daypacks when they're loaded up, and can even cover a gun in the scabbard. Or, you can leave the gun uncovered in case you're in a place where you think you'll need it quickly. The blaze side is a great way to flag your pack if you remove it to make a stalk. Why offer a rain cover when our pack fabric is waterproof? Think driving rain, when its impossible to keep the innards of a backpack dry without an honest rain cover. If you're going to be out for an extended trip in wet weather, or you'll be bivvying your pack, you'll appreciate having a nice rain cover along. PRODUCT INFO Weight: 9 oz

Eberlestock Featherweight Rain Covers are a compact and excellent addition to any pack. Like our reversible covers, these are designed to cover either the entire pack and a weapon that is being carried, or just the pack itself so that you can pull a gun from the scabbard. High quality polyurethane-coated nylon. PRODUCT INFO Weight: 4 oz Small Dimensions - 35"Tall x 30"Wide x 15"Deep Large Dimensions - 40"Tall x 40"Wide x 18"Deep FREQUENTLY BOUGHT TOGETHER

Large padded hip belt, as made for our V69 and V90 packs. The pads on this belt are a little wider and thicker than on our standard belts, and feature a generous 3 x 6 Padlock webbing matrix. The benefit to using this belt for heavier load bearing is that you get a little more structure and a little more surface area to distribute the load onto your hips. This comes at the cost of a little more bulk. So, although we feel our regular belts are well matched to the packs that we have them on, we offer these replacement belts with larger pads for those whose wish is for maximum comfort and support. Auxiliary anchor straps can be routed through webbing on the pack to increase the stability of the bottom of the pack, or removed if you prefer our classic free-hip-movement belt installation. Available only in the colors shown here. Weight: 1 lb 4oz The Regular / Small Contoured Hip belt works on all of our packs that feature removable belts. Use it as a replacement, or to pair with products where you want to add a belt (J79s G1, G3s main pack, or G1 Little Brother). This belt generally will work well for people with waists of 28"- 40". If you're looking for a shorter alternative to the standard hipbelt sold with our packs, the HBSS is about 2" shorter. The padded portion of the HBSS is 28" long, but the webbing straps extend to 60", so it will work for a variety of body sizes.

The Long Padded Hip Belt is an extended length hip belt for replacement of the Standard Hip Belt that comes with most packs. The Long Padded Hip Belt is recommended for individuals with a waist size larger than 42". All Eberlestock hip belts can be removed and replaced using our simple hook & loop system, taking just seconds to do. The Long Padded Hip Belt features additional padding alongside it's additional length. Individuals with a waist size below 42", needing additional padding, should refer to the Padded Hip Belt. Both of these upgrade options feature padding approximately double that of the Standard Hip Belt. The Long Padded Hip Belt features three horizontal rows of MOLLE webbing for attaching accessories, a 50mm DuraFlex HD buckle, as well as inward or outward pull adjustment. ***DOES NOT FIT THE SWITCHBLADE, LITTLE TRICK, BANDIT, OR GUNRUNNER.

The Thick Pad harness can be used to replace the standard harness on most Eberlestock packs. Choose it if you prefer a little bit more plush padding vs. the more minimalist padding in our standard "Shooters Harness." Works on all packs with removable harness except those with mid-back kidney pads attached to the harness (i.e, its not recommended for J117, J79, V69/90, etc.).

The Sniper Sled is widely considered to be the best 52" drag bag on the market. Our unique triple-fold rifle design is the only tapered bag that folds flat into a shooting mat. The third leaf also serves as an internal divider panel, which makes this an excellent two-rifle case. The E2B features a MOLLE-type attachment system for its three removable bags. The middle of these bags is a MOLLE compatible-version of Eberlestock’s A2MP MultiPack. Other improved features include a secure, adjustable, and removable harness system. The harness can be mounted two ways, 180-degrees apart, so that you can carry the bag with your rifle barrel up, or in a lower-profile barrel-down mode. Super-strong drag loops are fitted to either end. The interior features MOLLE/PALS-type webbing and two large plastic-mesh zippered pockets (shielded from your rifle by the middle leaf), secure and adjustable weapon tie-downs, and a fold-in rifle crown protector. A full MOLLE/PALS array covers the front panel beneath the detachable bags. PRODUCT INFO Weight: 7 lbs 9 oz Dimensions main bag: 52"l x 14"w x 2.5"d

The E57B is nearly identical to our E2B Sniper Sled Drag Bag. The main part of the rifle bag is simply extended, a little at each end, to make the overall interior length 57". Examples of weapons that can be carried in this bag are the Barrett L82A1M, fully assembled. Our unique triple-fold rifle design is the only tapered bag that folds flat into a shooting mat. The third leaf also serves as an internal divider panel, which makes this an excellent two-rifle case. The E2B features a MOLLE-type attachment system for its three removable bags. The middle of these bags is a MOLLE compatible-version of Eberlestock’s A2MP MultiPack. Other improved features include a secure, adjustable, and removable harness system. The harness can be mounted two ways, 180-degrees apart, so that you can carry the bag with your rifle barrel up, or in a lower-profile barrel-down mode. Super-strong drag loops are fitted to either end. The interior features MOLLE/PALS-type webbing and two large plastic-mesh zippered pockets (shielded from your rifle by the middle leaf), secure and adjustable weapon tie-downs, and a fold-in rifle crown protector. The bag also features an internal pocket for securing the stock of a shorter rifle. This provides a second securing place for a shorter rifle inside of the E57B (please note: there is no pocket for holstering a rifle longer than 53", rifles over this length are supported by the keeper straps) There is a full MOLLE/PALS array covering the front panel beneath the detachable bags.

The APSK Chest Mount Kit allows you to hang Eberlestock accessory pouches from your pack harness, converting them to chest packs. The APSK is compatible with our Nosegunner and Scout bino packs and our A2MP, A2SP, or A1SP padded accessory pouches. The kit includes upper straps that attach to your harness D-rings or cross-straps, and a lower set that connect to your hip belt, or on packs without webbing on the belt, to main the down-rigging on the shoulder harness. (Note, some smaller packs have a 1" waistbelt which works well for the bottom clip. On packs without 1" webbing on the belt, such as the M5 or X2, you can hook the bottom clip onto the main down-runner of your pack harness). PRODUCT INFO Before ordering, please verify that the buckles on your bino harness or pouch are match the type of APSK that you are ordering. Stealth buckles have the word STEALTH in fine print on the female buckle. HD buckles are embossed with UTX D-FLEX. Weight: 1 oz

The A1CS Scout Bino Pack is an ultra light system binocular harness and carrier system designed with a minimalist mindset. Like the Nosegunner, the Scout features a magnetic main compartment, making it quiet and simple to access your binos. The 3D mesh harness is very comfortable and ultra-breathable and can be worn under a pack -- or removed if you're carrying the Scout with our APSK kit. The back panel on this harness has a MOLLE/PALS webbing matrix, allowing you to attach accessories such as an A3SB Saddle Bag for hydration, or one of our scabbards.This system is simple and easy to use, that's not to say that this pouch doesn't have a surprise up its sleeve. Look to the back side of the Scout and you'll see an integrated sleeve for use as a pistol holster or a range finder holder. PRODUCT FEATURES 3D mesh harness MOLLE compatible shoulder harness Pistol/rangefinder holster Magnetic main compartment Front zipper tuck pocket for those small essential items Compatible with our APSK chest mount kit Secure integrated bino tether Sized for optics up to 10 x 42 PRODUCT INFO Dimensions: 6"L x 5.5"W x 2.5"D Weight w/o harness: 8 oz Weight w harness: 13.5 oz *Sizes of optics systems can vary by manufacturer. Please refer to product dimensions for best fit.

The A1CL Scout Bino Pack is an ultra light system binocular harness and carrier system designed with a minimalist mindset. Like the Nosegunner, the Scout features a magnetic main compartment, making it quiet and simple to access your binos. The 3D mesh harness is very comfortable and ultra-breathable and can be worn under a pack -- or removed if you're carrying the Scout with our APSK kit. The back panel on this harness has a MOLLE/PALS webbing matrix, allowing you to attach accessories such as an A3SB Saddle Bag for hydration, or one of our scabbards.This system is simple and easy to use, that's not to say that this pouch doesn't have a surprise up its sleeve. Look to the back side of the Scout and you'll see an integrated sleeve for use as a pistol holster or a range finder holder. PRODUCT FEATURES 3D mesh harness MOLLE compatible shoulder harness Pistol/rangefinder holster Magnetic main compartment Front zipper tuck pocket for those small essential items Compatible with our APSK chest mount kit Secure integrated bino tether PRODUCT INFO Dimensions: 8"L x 6"W x 3"D Weight w/o harness: 8 oz Weight w harness: 13.5 oz Sized for optics up to 15x56. *Sizes of optics systems can vary by manufacturer. Please refer to product dimensions for best fit.

Eberlestock A2CP Nosegunner Pack - Eberlestock customers have been asking us for this for a long time, and its time has come! Not only is the Nosegunner a great binocular or camera chest-pack.

Eberlestock A2SS Side Scabbard, Scoped Rifle - Side Scabbard for a scoped hunting rifle, recommended for use with our JP9 Blue Widow pack. Will also work with our X2 and other packs with external Padlock (PALS/MOLLE compatible) webbing. Also a great component for our packs with internal scabbard mounts, such as the J79 Skycrane II, F4 Terminator, or H1 Mini Me. On external mounts, we recommend augmenting the suspension of the A2SS's self-mounting attachments with compression straps, such as those found on many of our packs. Choose the larger A2LS if your rifle has large tactical turrets, a 50mm objective scope, or is fitted with a bipod. This scabbard has three sides (1) 3" side and (2) 7" sides creating a pie shaped opening. Dimensions: 34"h x 7"w x 3"d, with a 17" circumference opening Weight: 1 lbs 5 oz

Eberlestock A2LS Side Scabbard, Bolt Sniper Rifle - The A2LS is a larger four-panel side scabbard, similar in length to the A2SS 3-panel scabbard. The A2LS Bolt Sniper Rifle scabbard is recommended for conventional bolt-action rifles with larger scopes and/or bipods (but note, depending on the configuration it is not likely to work with deep-bellied rifles such as the Accuracy International chassis, or AR-type weapons). The A2LS features a self-mounting strap and hook system which allows it to be attached to most Padlock/MOLLE/PALS panels. It works best with packs that have compression straps, or for internal mounting in our J79, J51, F52, or F4 packs. Also works great with our H1 Mini Me pack. Pair it with our JSTC Butt Cover for a nice, snug drag bag. Choose the smaller A2SS for conventional scoped hunting rifles with standard hunting scopes, and no bipod. Choose the larger A4SS for bulkier weapons, such as AR-type weapons, Accuracy International style sniper rifles, or .50 cals. Dimensions: 34"h x 7"w x 3"d, with a 20" circumference opening Weight: 1 lb 5 oz

Eberlestock A4SS Tactical Weapon Carrier - Our A4SS Tactical Weapon Carrier is an improved version of our variable capacity A3SS Tactical Scabbard. The new version is still designed to be paired with our F4M Terminator and J79 Skycrane II packs, but has several improvements over the previous model. New stiffer sidewalls hold the scabbard open when a pack's load compresses it, so it's easier to insert and extract a weapon. And for the first time, our pack mountable scabbard is designed to work well as a stand-alone product. It still works great as an old-style drag bag, but now can be used as the foundation for a minimalist pack. Add a shoulder harness and a set of our ACST Accessory Straps, and the A4SS becomes a BackScabbard pack, to which you can add an assortment of pockets and build your own modular pack system. New additions also include grasp/carry handles on the middle edges of the scabbard, allowing easy at center-of-gravity carry of a weapon. Includes a GSTC Butt Cover, to allow you to fully enclose a weapon up to 60" long. Actual weight = 3.5 lbs. Ship weight = 11 lbs. PRODUCT DETAILS Dimensions: 36"h x 12"w Weight: 3 lbs 8 oz This scabbard has an adjustable depth

The A4DB is an ultralight rifle dry bag, it can be attached to a pack like our other scabbards using the MOLLE webbing. There are carry handles on each side of the rifle dry bag to make it easy for transporting your weapon. This dry bag scabbard is constructed of polyurethane-coated nylon so it's fully sealed, 100% air and water tight. The roll top can either be rolled inward to seal in the rifle or it can be rolled outward to allow the butt stock to be exposed for quick access to the rifle. It includes an ARCP Crown Cover to provide added rifle protection.

The ERM Sidewinder is an AR rifle-sized case. Its an excellent way to add a gun carrier to the R3 UpRanger Pack or Bang Bang Range Bag. Can be self-attached to MOLLE on packs. This high quality case has a unique sleeve for cleaning rods, giving the shooter a place to stow one of those items that is nice to have with you on the range. Dimensions: 42" Long Weight: 2 lbs 4 oz Shipping Weight = 10 lbs.

The ESM Sidewinder Shotgun and Scoped Rifle Case is sized to fit 3-gun style shotguns and scoped bolt action rifles. Its an excellent way to add a gun carrier to the R3 UpRanger Pack or Bang Bang Range Bag. Can be self-attached to MOLLE on packs. This high quality case has a unique sleeve for cleaning rods, giving the shooter a place to stow one of those items that is nice to have with you on the range. Dimensions: 52" Long Weight: 2 lbs 8 oz Shipping Weight = 10 lbs.

Eberlestock J3SD Super Spike Duffel Pack - Made for use with the J-series packs, and larger than the regular Spike Camp Duffel, the Super Spike increases your pack's capacity by a full 3500 cubic inches. This gives your J-type pack its maximum total volume of as much as 8300 cubic inches, depending on the pack model. It is made of the same NT1 fabric that our hunting packs are made of, so that when mounted externally you get both added capacity and greater camouflage coverage. The Super Spike also features external facing access, internal tuck-pockets, and a carry strap, making it useful not just in camp, but anytime you need a nice sized duffel bag. Just like the regular Spike Camp Duffel, the Super Spike can be carried either internally or externally on your J-series pack

This handy mid-sized dry bag is a good way to protect small items from wet weather. Designed for the backpacking environment, this lightweight, waterproof roll-top dry bag is seam sealed and made to ride in the main compartment of a pack, and is well suited for camera gear, books, and other sundries that you want to keep separate from the main contents of the pack. PRODUCT INFO Weight: 3 oz Actual Weight: 6 oz

Eberlestock A1DB Micro Dry Bag - The Micro Dry Bag is a tiny roll-top weatherproof bag. It's a great little gadget for keeping your valuables out of the rain and damp. Just big enough for most smart phones, it also works well for wallets, watches, and small documents like sniper's dope cards. Features two Annex clips on the back which are used to latch the bag to MOLLE-type 1" webbing or backpack harness straps. Weight:3 oz

Eberlestock J2DB J-Type Zip-On Dry Bag - A generously sized, backpackable lightweight dry bag, the J2SD is the perfect complement to your J-Type backpack, for both fair and foul weather. This high quality roll-top dry bag is uniquely suited to Eberlestock J-type packs: for J107, J34, and JP9 packs, it will either drop into the main cargo compartment, or zip onto the outside of the pack at the expansion zipper. For the J51 and J79, it fills either or both of the bulk load positions in the load bay. With approximately 4,000 cubic inches of stowage space secured by a roll-top suitable for a river trip, and with all seams taped, this is a great way to keep your gear dry. Actual Weight = 14 oz. Shipping Weight = 2 lbs. Dimensions: 24"h x 13"w x 11.5"d Weight: 1 lb 8 oz

These ultralight (10 oz.), 4000 to 6700 cubic inch dry bags are the perfect complement to your F1 Mainframe Pack, your M1 Carrier Frame Pack or your J-Type pack. Use one of these bags with your F1 Mainframe or the M1 Carrier Frame to instantly convert it to the most capable ultralight, high-volume backpack in the world. This setup can be enhanced by adding a pair of Batwing Pouches: if you're going to be hunting out of a spike camp, once you get there you can simply unzip the dry bag where you have your tent, sleeping bag, food, extra water, and anything else you want to keep in camp. Then you can zip together the two Batwings and hunt with a lightweight daypack (1,200 ci) that has world-class meat hauling capabilities. Not just for the frame sytems, these high quality roll-top dry bags are uniquely suited to the full family of EMOD products. Use them to add capacity to our J-type packs. For J117 and J34 packs, they will either drop into the main cargo compartment or zip onto the outside of the pack at the expansion zipper. For the J51 and J79, it fills either or both of the bulk load positions in the load bay. Choose either the J2DB or J3DB to get 4,000 or 6,700 cubic inches of stowage space secured by a roll-top and taped seams. This is a great lightweight option to keep your gear dry. [Regular] SKU: J2DB Volume: 65 Liters / 4,000 cubic inches Weight: 12 oz Dimensions: 30"h x 13"w x 13"d [Large] SKU: J3DB Volume: 110 Liters / 6,700 cubic inches Weight: 15 oz Dimensions: 30"h x 15"w x 15"d

The JSTC butt cover is made to allow you to fully cover the butt and optics of a rifle or shotgun that you'll be carrying in your Eberlestock pack or Side Scabbard. You can either clip the cover to the pack or Side Scabbard, turning them into a soft case, or leave the clips un-fastened, allowing quick access to your firearm. Get one to match your pack, or pick Blaze Orange, so you'll have effective 360 degree high visibility. *Please note: The default buckle type on the JSTC is the HD buckle. A portion of our 2018 production included a new type of buckle called the "HD" buckle. Previous productions used "Stealth" buckles. In order to match the accessory you order with a pack you already own, please look at the buckles on your pack. And if you're ordering the accessory along with a pack, don't worry; well take care of the selection for you. Dimensions: 13"h x 6"w x 3"d Weight: 12 oz