The Thick Pad harness can be used to replace the standard harness on most Eberlestock packs. Choose it if you prefer a little bit more plush padding vs. the more minimalist padding in our standard "Shooters Harness." Works on all packs with removable harness except those with mid-back kidney pads attached to the harness (i.e, its not recommended for J117, J79, V69/90, etc.).

The Sniper Sled is widely considered to be the best 52" drag bag on the market. Our unique triple-fold rifle design is the only tapered bag that folds flat into a shooting mat. The third leaf also serves as an internal divider panel, which makes this an excellent two-rifle case. The E2B features a MOLLE-type attachment system for its three removable bags. The middle of these bags is a MOLLE compatible-version of Eberlestock’s A2MP MultiPack. Other improved features include a secure, adjustable, and removable harness system. The harness can be mounted two ways, 180-degrees apart, so that you can carry the bag with your rifle barrel up, or in a lower-profile barrel-down mode. Super-strong drag loops are fitted to either end. The interior features MOLLE/PALS-type webbing and two large plastic-mesh zippered pockets (shielded from your rifle by the middle leaf), secure and adjustable weapon tie-downs, and a fold-in rifle crown protector. A full MOLLE/PALS array covers the front panel beneath the detachable bags. PRODUCT INFO Weight: 7 lbs 9 oz Dimensions main bag: 52"l x 14"w x 2.5"d

The E57B is nearly identical to our E2B Sniper Sled Drag Bag. The main part of the rifle bag is simply extended, a little at each end, to make the overall interior length 57". Examples of weapons that can be carried in this bag are the Barrett L82A1M, fully assembled. Our unique triple-fold rifle design is the only tapered bag that folds flat into a shooting mat. The third leaf also serves as an internal divider panel, which makes this an excellent two-rifle case. The E2B features a MOLLE-type attachment system for its three removable bags. The middle of these bags is a MOLLE compatible-version of Eberlestock’s A2MP MultiPack. Other improved features include a secure, adjustable, and removable harness system. The harness can be mounted two ways, 180-degrees apart, so that you can carry the bag with your rifle barrel up, or in a lower-profile barrel-down mode. Super-strong drag loops are fitted to either end. The interior features MOLLE/PALS-type webbing and two large plastic-mesh zippered pockets (shielded from your rifle by the middle leaf), secure and adjustable weapon tie-downs, and a fold-in rifle crown protector. The bag also features an internal pocket for securing the stock of a shorter rifle. This provides a second securing place for a shorter rifle inside of the E57B (please note: there is no pocket for holstering a rifle longer than 53", rifles over this length are supported by the keeper straps) There is a full MOLLE/PALS array covering the front panel beneath the detachable bags.

The APSK Chest Mount Kit allows you to hang Eberlestock accessory pouches from your pack harness, converting them to chest packs. The APSK is compatible with our Nosegunner and Scout bino packs and our A2MP, A2SP, or A1SP padded accessory pouches. The kit includes upper straps that attach to your harness D-rings or cross-straps, and a lower set that connect to your hip belt, or on packs without webbing on the belt, to main the down-rigging on the shoulder harness. (Note, some smaller packs have a 1" waistbelt which works well for the bottom clip. On packs without 1" webbing on the belt, such as the M5 or X2, you can hook the bottom clip onto the main down-runner of your pack harness). PRODUCT INFO Before ordering, please verify that the buckles on your bino harness or pouch are match the type of APSK that you are ordering. Stealth buckles have the word STEALTH in fine print on the female buckle. HD buckles are embossed with UTX D-FLEX. Weight: 1 oz

The A1CS Scout Bino Pack is an ultra light system binocular harness and carrier system designed with a minimalist mindset. Like the Nosegunner, the Scout features a magnetic main compartment, making it quiet and simple to access your binos. The 3D mesh harness is very comfortable and ultra-breathable and can be worn under a pack -- or removed if you're carrying the Scout with our APSK kit. The back panel on this harness has a MOLLE/PALS webbing matrix, allowing you to attach accessories such as an A3SB Saddle Bag for hydration, or one of our scabbards.This system is simple and easy to use, that's not to say that this pouch doesn't have a surprise up its sleeve. Look to the back side of the Scout and you'll see an integrated sleeve for use as a pistol holster or a range finder holder. PRODUCT FEATURES 3D mesh harness MOLLE compatible shoulder harness Pistol/rangefinder holster Magnetic main compartment Front zipper tuck pocket for those small essential items Compatible with our APSK chest mount kit Secure integrated bino tether Sized for optics up to 10 x 42 PRODUCT INFO Dimensions: 6"L x 5.5"W x 2.5"D Weight w/o harness: 8 oz Weight w harness: 13.5 oz *Sizes of optics systems can vary by manufacturer. Please refer to product dimensions for best fit.

The A1CL Scout Bino Pack is an ultra light system binocular harness and carrier system designed with a minimalist mindset. Like the Nosegunner, the Scout features a magnetic main compartment, making it quiet and simple to access your binos. The 3D mesh harness is very comfortable and ultra-breathable and can be worn under a pack -- or removed if you're carrying the Scout with our APSK kit. The back panel on this harness has a MOLLE/PALS webbing matrix, allowing you to attach accessories such as an A3SB Saddle Bag for hydration, or one of our scabbards.This system is simple and easy to use, that's not to say that this pouch doesn't have a surprise up its sleeve. Look to the back side of the Scout and you'll see an integrated sleeve for use as a pistol holster or a range finder holder. PRODUCT FEATURES 3D mesh harness MOLLE compatible shoulder harness Pistol/rangefinder holster Magnetic main compartment Front zipper tuck pocket for those small essential items Compatible with our APSK chest mount kit Secure integrated bino tether PRODUCT INFO Dimensions: 8"L x 6"W x 3"D Weight w/o harness: 8 oz Weight w harness: 13.5 oz Sized for optics up to 15x56. *Sizes of optics systems can vary by manufacturer. Please refer to product dimensions for best fit.

Eberlestock A2CP Nosegunner Pack - Eberlestock customers have been asking us for this for a long time, and its time has come! Not only is the Nosegunner a great binocular or camera chest-pack.

Eberlestock A2SS Side Scabbard, Scoped Rifle - Side Scabbard for a scoped hunting rifle, recommended for use with our JP9 Blue Widow pack. Will also work with our X2 and other packs with external Padlock (PALS/MOLLE compatible) webbing. Also a great component for our packs with internal scabbard mounts, such as the J79 Skycrane II, F4 Terminator, or H1 Mini Me. On external mounts, we recommend augmenting the suspension of the A2SS's self-mounting attachments with compression straps, such as those found on many of our packs. Choose the larger A2LS if your rifle has large tactical turrets, a 50mm objective scope, or is fitted with a bipod. This scabbard has three sides (1) 3" side and (2) 7" sides creating a pie shaped opening. Dimensions: 34"h x 7"w x 3"d, with a 17" circumference opening Weight: 1 lbs 5 oz

Eberlestock A2LS Side Scabbard, Bolt Sniper Rifle - The A2LS is a larger four-panel side scabbard, similar in length to the A2SS 3-panel scabbard. The A2LS Bolt Sniper Rifle scabbard is recommended for conventional bolt-action rifles with larger scopes and/or bipods (but note, depending on the configuration it is not likely to work with deep-bellied rifles such as the Accuracy International chassis, or AR-type weapons). The A2LS features a self-mounting strap and hook system which allows it to be attached to most Padlock/MOLLE/PALS panels. It works best with packs that have compression straps, or for internal mounting in our J79, J51, F52, or F4 packs. Also works great with our H1 Mini Me pack. Pair it with our JSTC Butt Cover for a nice, snug drag bag. Choose the smaller A2SS for conventional scoped hunting rifles with standard hunting scopes, and no bipod. Choose the larger A4SS for bulkier weapons, such as AR-type weapons, Accuracy International style sniper rifles, or .50 cals. Dimensions: 34"h x 7"w x 3"d, with a 20" circumference opening Weight: 1 lb 5 oz

Eberlestock A4SS Tactical Weapon Carrier - Our A4SS Tactical Weapon Carrier is an improved version of our variable capacity A3SS Tactical Scabbard. The new version is still designed to be paired with our F4M Terminator and J79 Skycrane II packs, but has several improvements over the previous model. New stiffer sidewalls hold the scabbard open when a pack's load compresses it, so it's easier to insert and extract a weapon. And for the first time, our pack mountable scabbard is designed to work well as a stand-alone product. It still works great as an old-style drag bag, but now can be used as the foundation for a minimalist pack. Add a shoulder harness and a set of our ACST Accessory Straps, and the A4SS becomes a BackScabbard pack, to which you can add an assortment of pockets and build your own modular pack system. New additions also include grasp/carry handles on the middle edges of the scabbard, allowing easy at center-of-gravity carry of a weapon. Includes a GSTC Butt Cover, to allow you to fully enclose a weapon up to 60" long. Actual weight = 3.5 lbs. Ship weight = 11 lbs. PRODUCT DETAILS Dimensions: 36"h x 12"w Weight: 3 lbs 8 oz This scabbard has an adjustable depth

The A4DB is an ultralight rifle dry bag, it can be attached to a pack like our other scabbards using the MOLLE webbing. There are carry handles on each side of the rifle dry bag to make it easy for transporting your weapon. This dry bag scabbard is constructed of polyurethane-coated nylon so it's fully sealed, 100% air and water tight. The roll top can either be rolled inward to seal in the rifle or it can be rolled outward to allow the butt stock to be exposed for quick access to the rifle. It includes an ARCP Crown Cover to provide added rifle protection.

The ERM Sidewinder is an AR rifle-sized case. Its an excellent way to add a gun carrier to the R3 UpRanger Pack or Bang Bang Range Bag. Can be self-attached to MOLLE on packs. This high quality case has a unique sleeve for cleaning rods, giving the shooter a place to stow one of those items that is nice to have with you on the range. Dimensions: 42" Long Weight: 2 lbs 4 oz Shipping Weight = 10 lbs.

The ESM Sidewinder Shotgun and Scoped Rifle Case is sized to fit 3-gun style shotguns and scoped bolt action rifles. Its an excellent way to add a gun carrier to the R3 UpRanger Pack or Bang Bang Range Bag. Can be self-attached to MOLLE on packs. This high quality case has a unique sleeve for cleaning rods, giving the shooter a place to stow one of those items that is nice to have with you on the range. Dimensions: 52" Long Weight: 2 lbs 8 oz Shipping Weight = 10 lbs.

Eberlestock J3SD Super Spike Duffel Pack - Made for use with the J-series packs, and larger than the regular Spike Camp Duffel, the Super Spike increases your pack's capacity by a full 3500 cubic inches. This gives your J-type pack its maximum total volume of as much as 8300 cubic inches, depending on the pack model. It is made of the same NT1 fabric that our hunting packs are made of, so that when mounted externally you get both added capacity and greater camouflage coverage. The Super Spike also features external facing access, internal tuck-pockets, and a carry strap, making it useful not just in camp, but anytime you need a nice sized duffel bag. Just like the regular Spike Camp Duffel, the Super Spike can be carried either internally or externally on your J-series pack

This handy mid-sized dry bag is a good way to protect small items from wet weather. Designed for the backpacking environment, this lightweight, waterproof roll-top dry bag is seam sealed and made to ride in the main compartment of a pack, and is well suited for camera gear, books, and other sundries that you want to keep separate from the main contents of the pack. PRODUCT INFO Weight: 3 oz Actual Weight: 6 oz

Eberlestock A1DB Micro Dry Bag - The Micro Dry Bag is a tiny roll-top weatherproof bag. It's a great little gadget for keeping your valuables out of the rain and damp. Just big enough for most smart phones, it also works well for wallets, watches, and small documents like sniper's dope cards. Features two Annex clips on the back which are used to latch the bag to MOLLE-type 1" webbing or backpack harness straps. Weight:3 oz

Eberlestock J2DB J-Type Zip-On Dry Bag - A generously sized, backpackable lightweight dry bag, the J2SD is the perfect complement to your J-Type backpack, for both fair and foul weather. This high quality roll-top dry bag is uniquely suited to Eberlestock J-type packs: for J107, J34, and JP9 packs, it will either drop into the main cargo compartment, or zip onto the outside of the pack at the expansion zipper. For the J51 and J79, it fills either or both of the bulk load positions in the load bay. With approximately 4,000 cubic inches of stowage space secured by a roll-top suitable for a river trip, and with all seams taped, this is a great way to keep your gear dry. Actual Weight = 14 oz. Shipping Weight = 2 lbs. Dimensions: 24"h x 13"w x 11.5"d Weight: 1 lb 8 oz

These ultralight (10 oz.), 4000 to 6700 cubic inch dry bags are the perfect complement to your F1 Mainframe Pack, your M1 Carrier Frame Pack or your J-Type pack. Use one of these bags with your F1 Mainframe or the M1 Carrier Frame to instantly convert it to the most capable ultralight, high-volume backpack in the world. This setup can be enhanced by adding a pair of Batwing Pouches: if you're going to be hunting out of a spike camp, once you get there you can simply unzip the dry bag where you have your tent, sleeping bag, food, extra water, and anything else you want to keep in camp. Then you can zip together the two Batwings and hunt with a lightweight daypack (1,200 ci) that has world-class meat hauling capabilities. Not just for the frame sytems, these high quality roll-top dry bags are uniquely suited to the full family of EMOD products. Use them to add capacity to our J-type packs. For J117 and J34 packs, they will either drop into the main cargo compartment or zip onto the outside of the pack at the expansion zipper. For the J51 and J79, it fills either or both of the bulk load positions in the load bay. Choose either the J2DB or J3DB to get 4,000 or 6,700 cubic inches of stowage space secured by a roll-top and taped seams. This is a great lightweight option to keep your gear dry. [Regular] SKU: J2DB Volume: 65 Liters / 4,000 cubic inches Weight: 12 oz Dimensions: 30"h x 13"w x 13"d [Large] SKU: J3DB Volume: 110 Liters / 6,700 cubic inches Weight: 15 oz Dimensions: 30"h x 15"w x 15"d

The JSTC butt cover is made to allow you to fully cover the butt and optics of a rifle or shotgun that you'll be carrying in your Eberlestock pack or Side Scabbard. You can either clip the cover to the pack or Side Scabbard, turning them into a soft case, or leave the clips un-fastened, allowing quick access to your firearm. Get one to match your pack, or pick Blaze Orange, so you'll have effective 360 degree high visibility. *Please note: The default buckle type on the JSTC is the HD buckle. A portion of our 2018 production included a new type of buckle called the "HD" buckle. Previous productions used "Stealth" buckles. In order to match the accessory you order with a pack you already own, please look at the buckles on your pack. And if you're ordering the accessory along with a pack, don't worry; well take care of the selection for you. Dimensions: 13"h x 6"w x 3"d Weight: 12 oz

The GSTC Butt Cover is a replacement gun cover for our packs with wide scabbards (GS05, G2, G3, G4, etc). It can also be paired with wide-scabbard packs that are sold without the GSTC, such as the X31. *Please note: In order to match the accessory you order with a pack you already own, please look at the buckles on your pack. Champion buckles are embossed with the a small "WJ" on the back side of the female buckle, and the male buckles have a short middle fork. M-Type HD Heavy Duty buckles also are embossed with a small WJ, but have a more blocky appearance and a long middle fork. Stealth buckles have a fine printing of the word "Stealth" or "Stealth Warrior" on the buckles, and have a middle fork that's about the same length as the outer forks. If you're ordering the accessory along with a pack, don't worry; well take care of the selection for you. Dimensions: 13"h x 9"w x 3"d Weight: 12 oz / Shipping Weight: 2 lbs

The Longbow Carrier mounts onto Eberlestock packs that have our Padlock system webbing strips on their lower frontal area. Its ideally suited for the X2, JP9 Blue Widow, or F3 Halftrack, but will work with many others. It comes with self-mounting Annex Clips that allow you to attach it to a packs Padlock matrix. The kit includes a Ripcord Tether. Available in Dry Earth only, to match the trim of our hunting packs. Weight: 12 oz

Eberlestock RASR Rapid Acquisition Shooting Rest - For long range accuracy, a stabilizing rest of some sort is a fundamental item. This has led the community from resting on rocks to resting on back- packs (of which we approve)... and we now move from resting on bipods or shooting sticks to something that simply works better. Traditional bipods have several limitations: first, you have a narrow field of fire, restricted to the geometry of your body position vs. bipod elevation and position. To adjust things, you have to drag the bipod through the dirt, and you have to come off your gun to make rough changes to elevation. There is no fine tuning. In the end, you either scrunch, or lift your torso in order to get the sights on target. Enter the RASR ™ Rapid Acquisition Shooting Rest. Simple to set up, it allows you to adjust for both azimuth and elevation while looking through the sights, while staying on the gun. You easily and smoothly adjust to the situation, even to include radical declivity shooting. It opens up a whole new window of targeting that you can't comfortably get without a highly adjustable rest. -Got an obstacle, such as tall grass, brush, or a berm to shoot over? The RASR comes with a set of extension rods that allow you to set up very stable sitting and kneeling positions, both of which are superior to using shooting sticks, to say nothing of keeping away from offhand shots. -The next great advantage to the RASR is that it eliminates bipod skip. Your rifle makes a more natural recoil, so that follow-up shots take very little readjusting. -Comes with three variable extension rods -- one for high prone, one for sitting, and one for kneeling. Use with any standard bipod (sold separately).

Eberlestock AG2 Gossamer G-Type Frame - Weight: 10 oz The Gossamer frame is designed to complement our packs that have the Intex II tubular frame. The interchangeability of these two frame types fulfills the Intex II modular concept. The basic design of packs equipped with the Intex II is intended to take advantage of the frame's superior support, comfort, and load-bearing interface with the human body. But there are times when you may want a flatter or more compressible pack, or a more flexible overall structure, and it is for these reasons that we've developed the Gossamer. Made of polycarbonate with vertical-axis stiffening channels, the Gossamer gives an ideal mix of vertical support and torsional flex. It is quite tough and is superior to polyethylene frame-sheets which form the core structure of most internal frame packs. Thus, the Gossamer is a simple and high-performance means to convert your Intex-II equipped pack to a more traditional internal frame pack. Once you're equipped with a Gossamer, you'll be able to switch your pack back and forth, selecting a style that best meets the needs of the day. The Gossamer comes in two sizes: choose the AG2S for our slightly shorter packs (the G2), or the AG2L for our longer packs (the G4). Shipping Dimensional Weight = 7 lbs. (due to the requirement for a long carton).

Eberlestock AGIF Endo G-type Internal Frame - Weight: 4 oz The Endo is a great addition to many of our daypacks. Most of our smaller packs have classic internal small-pack frames called framesheets. These plastic sheets are well suited to their purpose, but sometimes our customers will want more structure. The Endo is the answer to this need; when inserted into the main load area of a pack, it nestles into the back corner, placing it alongside the main frame panel. Once there, the pack is transformed into a much more structured pack, with vertical and lateral rigidity. The great thing about this concept is that it adds very little weight to the pack, you can't feel any difference in comfort when the pack is on your back, and there is no noise associated with the frame. The Endo has a subtle contour designed to enhance the lumbar support of our packs, and to follow the natural arc of the wearer's mid-upper back. Please note, the list of packs that this frame is compatible with is shown below under the Related Items prompt.

Like an ammunition Bandolier, the Bando Bag is a lightweight and convenient way to transport your EDC items. A full-zip back pocket measures to 5.5”h x 9.5”w x 1”d, large enough to secure most sub-compact and compact sidearms like the Glock-19 and those similar in size or smaller. The main compartment features an interior mesh zippered pocket, and two slip pockets for additional organization. A small zippered front pocket is perfect for keys, cords, or other small items. The waist belt length is adjustable from 31.5” - 44”.

The EMOD Lid attaches to the Vapor (both 2500 and 5000c.i. old and new versions) and Mainframe system in 4 locations using quick-detach gatekeeper buckles. The EMOD Lid allows you to add additional capacity to the Vapor for smaller items and utilize the EMOD Lid to compress items between it and the top of the Vapor pack. The EMOD Lid features a top pocket made of durable stretch fabric, and a main compartment large enough to store accessories and small gear items. EMOD Lid: 12"H x 12"W x 4.5"D - 12oz

The EMOD Quarter Game Bag is designed to protect meat from any element, allowing it to cool and dry quickly. The bag is constructed with lightweight, breathable, and durable fabrics that trap odor and won’t fail. Lightweight webbing loops assist in securing the bag to our EMOD system. Eberlestock EMOD Quarter Game Bags are available in two sizes to cover all game types and pack-out scenarios. Both the medium and large bags are sold as sets of 2 and come in an included stuff sack. Quarter Bag Medium: 32”H x 20”W x 4”D - 8oz total for set Quarter Bag Large: 42”H x 24”W x 4”D - 10.5oz total for set

The EMOD Boned Out Game Bags are designed to protect meat from any element, allowing it to cool and dry quickly. The bag is constructed with lightweight, breathable, and durable fabrics that trap odor and won’t fail. Lightweight webbing loops assist in securing the bag to our EMOD system. The Eberlestock Boned Out Game Bags are available in two sizes. Both the medium and large are designed to fit perfectly between the frame and your pack. Boned-Out Medium: 18”H x 9.5”W x 6”D - 3oz Boned-Out Large: 22”H x 10”W x 8”D - 4oz

The General Purpose Pouch is a simply-designed, quality made pouch which can attach almost anywhere you find MOLLE webbing on an Eberlestock pack or accessory. The two-way zipper allows for easy access to the main compartment and additional padding makes it optimal for carrying small but expensive items like rangefinders, GPS, and camera accessories. The added stretch pocket allows easy and quick access to essential items. TECHNICAL SPECS Weight 4.4oz Dimensions:5.5”H x 8”W x 2.5”D

The General Purpose Pouch is a simply-designed, quality made pouch which can attach almost anywhere you find MOLLE webbing on an Eberlestock pack or accessory. The two-way zipper allows for easy access to the main compartment and additional padding makes it optimal for carrying small but expensive items like rangefinders, GPS, and camera accessories. The added stretch pocket allows easy and quick access to essential items. TECHNICAL SPECS Weight 3.8oz Dimensions: 5.5”H x 6”W x 2.5”D